DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer

The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side “roll” – keeping the horizon level – one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105⁰ up / 165⁰ down plus a roll range of ±110⁰. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.

KSH 120,000.00 + Vat

Email
Compare
Performance
Load Weight (Reference Value) 8 lb / 3.6 kg
Angular Vibration Range ±0.02°
Maximum Controlled Rotation Speed Pan Axis: 90°/s
Tilt Axis: 100°/s
Roll Axis: 30°/s
Mechanical Endpoint Range Pan Axis Control: 360°/s
Tilt Axis Control: +105° /-165°/s
Roll Axis Control: ± 110°/s
Controlled Rotation Range Pan Axis Control: 360°/s
Tilt Axis Control: +105° /-165°/s
Roll Axis Control: ± 25°/s
Electrical and Mechanical
Motor Type 3 x Brushless
Working Current Static Current: 300 mA (at 16 VDC)
Dynamic Current: 600 mA (at 16 VDC)
Locked Motor Current: 10 A maximum (at 16 VDC)
Sensors Independent IMU module
Temperature sensor
Processing 32-bit DSP processor
Receiver
Frequency 2.4 GHz
Expandability D-Bus receiver supported
Connectivity
Wireless 2.4 GHz for transmitter (remote controller)
Bluetooth 4.0
Wired 2 x 12 VDC regulated PowerTap
1 x USB power output (500 mW)
1 x DJI Lightbridge interface
System Requirements
Assistant Software Desktop: Windows (32- or 64-bit): 8, 7, XP SP3
Mac OS X: 10.9 or aboveMobile:
iOS 7.0 or later
General
Control Modes Underslung Mode
Upright Mode
Briefcase Mode
Supported Camera Dimensions Maximum depth at center of mass on camera base plate: 4.7″ / 120 mm
Maximum height measured from top of camera base plate: 7.7″ / 195 mm
Maximum width: 6.3″ / 160 mm
Power Requirements 4S Ronin-M Battery
Operating Temperature -5 to 122°F / -15 to 50°C
Dimensions (W x D x H) 19.7 x 8.3 x 16.5″ / 500 x 210 x 420 mm
Weight 5.07 lb / 2.3 kg (fully loaded with handlebar)
Packaging Info
Package Weight 15.85 lb
Box Dimensions (LxWxH) 18.8 x 12.5 x 11.5″